Homebrew PCBs

Perfect, but pricey. On the other hand I like a good tool. I'll see if
Ebay has a cheaper version. Thanks for the link!!

Mike



--- In Homebrew_PCBs@yahoogroups.com, "Norm Carlberg" <normnet@...> wrote:
>
> Laminate to .188"
> Not tried on PBC's.  Spring tension hinged top rollers.  
> Used in sign shop for several years.
> 
> http://www.usi-laminate.com/store/wpbec_viewItem.asp?idProduct=2115
> 
> Norm
> 
> 
>   ----- Original Message ----- 
>   From: Mike Phillips 
>   To: Homebrew_PCBs@yahoogroups.com 
>   Sent: Tuesday, November 21, 2006 12:40 PM
>   Subject: [Homebrew_PCBs] Laminator for .093" pcb.
> 
> 
>   After reading thru the archives I don't see anyone trying to use a
>   laminator for boards that are .093" thick. Is there a laminator that
>   can be modified to be made adjustable so I can go as high as .093" ?
> 
>   I typically try to make a single sided board so it won't short to
>   things on my bench. So drilling is not needed. I have used the clothes
>   iron on the last .093" board. It worked fine, but the lines get
>   expanded quite a bit from the excess uneven pressure.
> 
>   Mike
> 
> 
> 
>    
> 
> [Non-text portions of this message have been removed]
>