Homebrew PCBs

Laminate to .188"
Not tried on PBC's.  Spring tension hinged top rollers.  
Used in sign shop for several years.

http://www.usi-laminate.com/store/wpbec_viewItem.asp?idProduct=2115

Norm


  ----- Original Message ----- 
  From: Mike Phillips 
  To: Homebrew_PCBs@yahoogroups.com 
  Sent: Tuesday, November 21, 2006 12:40 PM
  Subject: [Homebrew_PCBs] Laminator for .093" pcb.


  After reading thru the archives I don't see anyone trying to use a
  laminator for boards that are .093" thick. Is there a laminator that
  can be modified to be made adjustable so I can go as high as .093" ?

  I typically try to make a single sided board so it won't short to
  things on my bench. So drilling is not needed. I have used the clothes
  iron on the last .093" board. It worked fine, but the lines get
  expanded quite a bit from the excess uneven pressure.

  Mike



   

[Non-text portions of this message have been removed]