Homebrew PCBs

I have ordered several of the $33 specials from Advanced circuits. 
They have solder mask and silk screen on BOTH sides.  They also have a
site, www.freedfm.com  ,that you upload your files to for a FREE check  
to catch errors before manufacturing.  This will catch a lot of dumb
errors.  The board size is anything up to 60 sq inches.  I put several
smaller boards on a panel.  The last 2 were 58 sq-in.  Advanced
circuits will not cut the individual boards out without additional
cost($50 I think).  I use an 18" paper cutter to cut them out.
  The boards are produced in 5 days or less and are MADE IN U.S.A.!! 
My only complaint is you must buy 3 or more, so(unless you are a
student) the total is $116 with shipping(to Idaho).

Dave - WB6DHW

--- In Homebrew_PCBs@yahoogroups.com, "adastra_2001"
<adastra_2001@...> wrote:
>
You can get $.55 per sq. inch at the 
> > link below for better standards on paper, but the catch is you have 
> to 
> > spend at least $33.00 if you're a student and $99.00 otherwise. 
> > Clearly not suitable depending on how much you have to spend.
> > 
> > https://www.33each.com/!33each1.asp
> > 
> > --- In Homebrew_PCBs@yahoogroups.com, "adastra_2001" 
> > <adastra_2001@> wrote:
> > >
> >
> If I am right, that price is with silk screen mask And they do allow 
> you odd shape boards. If the other guys are $0.33 with those options 
> then they are a better deal. The main reason for this thread is to get 
> board houses that others have used known to the world. I can make my 
> own board but if it is a project I plan to make money with then I want 
> the prototype done professionaly so I can determine any manufacturing 
> issues.
>