Homebrew PCBs

>You've come to the same conclusion I did several months ago, the 
>fishtank pump just doesn't cut it. 

Well it certainly cuts it here provided you're only etching one to two 
boards at a time and the good part is that the tank, heater and 
aquarium pump only cost me $29.00. The size of the tank and the size 
of the holes (hence the size of the bubbles) is the key to the design. 

http://www.pbase.com/eldata/image/62352753/original

--- In Homebrew_PCBs@yahoogroups.com, Robert Hedan <robert.hedan@...> 
wrote:
>