Homebrew PCBs

I am using Epson CX4200 as a printer and inks are from MIS (http://www.inksupply.com).  They are refill inks and the product code is MISPRO42-SET-MK.

derekhawkins <eldata@...> wrote:  --- In Homebrew_PCBs@yahoogroups.com, Volkan Sahin <vsahin@...> wrote:
>
> Hi Stefan,
> I can send sample board no problem.  Give me your address but 
postage can take around a week from USA to Europe via USPS or if 
there is someone who wish to try it in USA, it will be quicker. 
Combining inks in a one cartridge is a good idea another important 
thing is the thickness of the ink. I think on printer if you select 
black color printing it uses combination of 3 (may be 4) colors to 
generate black and huge amount of ink which results  thick ink layer 
on copper. Because of that I wonder whether with one color similar 
amount of ink can still be generated or not. Sw settings need to be 
checked. I will try it this night on foil.    
>   Volkan
>    
>    
> 
> 
> [Non-text portions of this message have been removed]
>






Be sure to visit the group home and check for new Links, Files, and Photos:
http://groups.yahoo.com/group/Homebrew_PCBs

If Files or Photos are running short of space, post them here:
http://groups.yahoo.com/group/Homebrew_PCBs_Archives/ 


    
---------------------------------
  YAHOO! GROUPS LINKS 

    
    Visit your group "Homebrew_PCBs" on the web.
    
    To unsubscribe from this group, send an email to:
 Homebrew_PCBs-unsubscribe@yahoogroups.com
    
    Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service. 

    
---------------------------------
  




[Non-text portions of this message have been removed]