Homebrew PCBs

Aha...great--- since i just dumped my old panasonic, i'll 
disassemble it and see what's usefull in there. Thanks!

--- In Homebrew_PCBs@yahoogroups.com, "Stefan Trethan" 
<stefan_trethan@...> wrote:
>
> As many have said there's some sort of experience threshold, after 
which  
> you'll be able to make at least a well useable board each time.
> 
> A fuser is the unit with two rollers between the paper passes. One 
roller  
> is aluminum heated by a lamp, the other is rubber.
> If you take this out of the printer, add a temperature controller, 
and a  
> motor, you have a great tool for fusing PCBs.
> 
> ST
> 
> 
> On Mon, 13 Feb 2006 18:32:58 +0100, protonceksleeperman  
> <protoncek@...> wrote:
> 
> > So, first i'd like to explain fuser...what exactly this is...? i
> >
> > know it's in laser printers (i have one waste  )...
> >
> >
> > Secondly...with this last paper (HP soft gloss) it's kinda harder
> >
> > since, as said, paper doesn't really stick to the board, which is
> >
> > good in the look of easy removing, and bad in the look of 
possible
> >
> > sliding. I'll try to tape it somehow, but just normal sello-tape
> >
> > won't do since it melts.
> >
> >
> > I guess it's really best if i get a hold on some
> >
> > laminator...damn...i didn't think this start is so hard...
> >
> > but luckily it seems i have you guys to help me out, so i thank 
you
> >
> > all!
> >
>