Yahoo Groups archive

Homebrew_PCBs

Index last updated: 2026-03-31 23:13 UTC

Message

Re: Cleaning PCB without Acetone

2006-02-07 by dl5012

All of these chemicals are irritants so you should avoid getting them
in your eyes, on your skin, or inhaled.

ethanol - causes skin and eye irritation. Ingestion can cause nausea,
vomitting, and inebriation. Chronic use can cause sever liver damage.

denatured alcohol - same as ethanal except it can kill you

IAP - harmful by inhalation, ingestion, or skin absorption. May act
as an irritant.

acetone - may be harmful by inhalation, ingestion, or skin
absorption. Irritant - liquid may cause permanent eye damage (corneal
clouding). Skin contact may cause defatting (always in my case...).
Also called dimethyl ketone, methyl ketone.

ferric chloride - corrosive - causes burns. Harmful if swallowed and
in contact with skin. Prolonged contact may lead to dermatitis.

Regards,
Dennis
--- In Homebrew_PCBs@yahoogroups.com, "Stefan Trethan"
<stefan_trethan@...> wrote:
>
> Isn't MEK the stuff that _will_ damage your eyes badly in case of
splashes?
>
> ST

Attachments