Yahoo Groups archive

Homebrew PCBs

Index last updated: 2026-04-28 23:05 UTC

Message

Re: [Homebrew_PCBs] Re: Cleaning PCB without Acetone

2006-02-07 by Stefan Trethan

Isn't MEK the stuff that _will_ damage your eyes badly in case of splashes?

ST


On Tue, 07 Feb 2006 11:18:25 +0100, Trevor Matthews  
<trev.matthews@...> wrote:

> I would be VERY careful about using MEK heaps - its an effective solvent
>
> for sure, but it also a recognised carcinogenic here in Australia, and
>
> therefore in the workplace occupational health guys go nuts over
>
> quantities used by individual workers and amospheric systems.  But on
>
> the other hand, acetone and IPA are also highly flammable!!!
>
>
>   Whichever you use use in a well ventilated area and be careful with
>
> ignition sources!!!
>
>
>   Trev

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.