Homebrew PCBs

Chris,
      The Brute is 5 years old and the Hawk is two years old. Many
people have build them. I just figured I would mention it since some
people have been talking about building a CNC driller. People have
scratch built a Brute for under $200. If you buy a motor system then
it will be $300. 

                                            John


--- In Homebrew_PCBs@yahoogroups.com, "lcdpublishing"
<lcdpublishing@y...> wrote:
>
> Hi John,
> 
> Ballendo was in here a couple of weeks ago announcing his Roadrunner
> [?] router/pcb mills that he is making.  His machine, if I recall 
> correctly, comes complete with motors, drivers, mechanicals, etc. 
> for $500.00
> 
> Like everyone else, I have no idea what the machine actually looks 
> like, but the data he is presenting is impressive for the price.  I 
> don't know for sure either if it comes assembled or not.  Just 
> thought I would share that with you in case you were not aware of 
> his offerings.
> 
> Chris
> 
> 
> 
> 
> 
> 
> --- In Homebrew_PCBs@yahoogroups.com, "crankorgan" <john@k...> wrote:
> >
> > Hi All,
> >         I sell plans for two kinds of CNC mills that have been used
> > for milling and drilling PCB. They both use Derin Gibs and Gibs.
> > Neither uses homemade DRILLED DELRIN bushings. Gibs and Jibs can be
> > adjusted at any time so there is no play unlike homemade bushings 
> that
> > may be too loose or bind . Both machines can be built using simple
> > hand tools. Both machines can be built for around $100 minus
> > motors-drivers and software.
> > 
> >                                           John
> >
>