Fairlight-CMI

how would one go about syncing a IIx with midi to a tr808?

Haven´t tried it but through the Sync-connector on the breakoutbox you 
should get DIN-sync.

Tried to use it a few months ago with no luck but I can try again if you´d 
like me too ?

WT

----- Original Message ----- 
From: "elanb" <lobit12@yahoo.com>
To: <Fairlight-CMI@yahoogroups.com>
Sent: Thursday, April 01, 2010 4:43 PM
Subject: [Fairlight-CMI] best way to sync to/from a tr808?



how would one go about syncing a IIx with midi to a tr808?

the sync plug is the same as din sync? that sounds way too easy. is it a pulse output that comes out the sync jack? i could hack up a midi cable and try it but i want to see if that's what's actually coming out the fairlight.

--- In Fairlight-CMI@yahoogroups.com, "WT" <waveterm@...> wrote:

>
> Haven´t tried it but through the Sync-connector on the breakoutbox you 
> should get DIN-sync.
> 
> Tried to use it a few months ago with no luck but I can try again if you´d 
> like me too ?
> 
> WT
> 
> ----- Original Message ----- 
> From: "elanb" <lobit12@...>
> To: <Fairlight-CMI@yahoogroups.com>
> Sent: Thursday, April 01, 2010 4:43 PM
> Subject: [Fairlight-CMI] best way to sync to/from a tr808?
> 
> 
> 
> how would one go about syncing a IIx with midi to a tr808?
>

The clock connector is Dinsync.

The Sync ( on the midibox ) connector is actually 4 different outputs with a 
common ground, fed from the syncinput through 6840 timers to divide the 
incoming clock.

Read the servicemanual for more info.

WT

----- Original Message ----- 
From: "elanb" <lobit12@yahoo.com>
To: <Fairlight-CMI@yahoogroups.com>
Sent: Thursday, April 01, 2010 9:50 PM
Subject: [Fairlight-CMI] Re: best way to sync to/from a tr808?


the sync plug is the same as din sync? that sounds way too easy. is it a 
pulse output that comes out the sync jack? i could hack up a midi cable and 
try it but i want to see if that's what's actually coming out the fairlight.

--- In Fairlight-CMI@yahoogroups.com, "WT" <waveterm@...> wrote:

>
> Haven´t tried it but through the Sync-connector on the breakoutbox you
> should get DIN-sync.
>
> Tried to use it a few months ago with no luck but I can try again if you´d
> like me too ?
>
> WT
>
> ----- Original Message ----- 
> From: "elanb" <lobit12@...>
> To: <Fairlight-CMI@yahoogroups.com>
> Sent: Thursday, April 01, 2010 4:43 PM
> Subject: [Fairlight-CMI] best way to sync to/from a tr808?
>
>
>
> how would one go about syncing a IIx with midi to a tr808?
>