Doepfer

> ----- Original Message -----
> From: "Dieter Doepfer" <hardware@doepfer.de>
> To: "Bakis Sirros" <syrros@ath.forthnet.gr>
> Sent: Tuesday, March 11, 2003 11:48 AM
> 
> 
> > Hi Bakis,
> >
> > in one of your forum messages you wrote:
> >
> > ".... the mcv24 has a clock output but not a reset
> output that is
> essentials for
> > syncing the a100 sequencers.(the mcv24 has a
> start/stop output that i
> haven't
> > use with any of the
> > a100 modules.it may be of use with old drum
> machines ...."
> >
> > The only difference between reset and start/stop
> is the polarity.
> >
> > Stop state: Reset = high, Start/Stop = low
> > Running state: Reset = low, Start/Stop = high
> >
> > With the usage of a inverter you could use the
> MCV24 to generate the reset
> > signal too.
> >
> > The reason for both type of signals is history:
> Roland used the Start/Stop
> > signal in the Roland Sync standard (high while
> running, low during stop).
> Other
> > manufacturers used the reset signal (low while
> running, high during stop).
> >
> > Dieter
  

SORRY GUYS...DIETER KNOWS BETTER,THEN... :-))
BAKIS.








=====
synthfreak(parallel worlds)
athens-greece
[Doepfer_a100] group owner-moderator

__________________________________________________
Do you Yahoo!?
Yahoo! Web Hosting - establish your business online
http://webhosting.yahoo.com

So you would patch the MCV24 Start/Stop through the Trigger 
Modifier to the A155 Reset? Or is it the Voltage Inverter?

--- In Doepfer_a100@yahoogroups.com, Bakis Sirros 
<synth_freak_2000@y...> wrote:

> 
> > ----- Original Message -----
> > From: "Dieter Doepfer" <hardware@d...>
> > To: "Bakis Sirros" <syrros@a...>
> > Sent: Tuesday, March 11, 2003 11:48 AM
> > 
> > 
> > > Hi Bakis,
> > >
> > > in one of your forum messages you wrote:
> > >
> > > ".... the mcv24 has a clock output but not a reset
> > output that is
> > essentials for
> > > syncing the a100 sequencers.(the mcv24 has a
> > start/stop output that i
> > haven't
> > > use with any of the
> > > a100 modules.it may be of use with old drum
> > machines ...."
> > >
> > > The only difference between reset and start/stop
> > is the polarity.
> > >
> > > Stop state: Reset = high, Start/Stop = low
> > > Running state: Reset = low, Start/Stop = high
> > >
> > > With the usage of a inverter you could use the
> > MCV24 to generate the reset
> > > signal too.
> > >
> > > The reason for both type of signals is history:
> > Roland used the Start/Stop
> > > signal in the Roland Sync standard (high while
> > running, low during stop).
> > Other
> > > manufacturers used the reset signal (low while
> > running, high during stop).
> > >
> > > Dieter
>   
> 
> SORRY GUYS...DIETER KNOWS BETTER,THEN... :-))
> BAKIS.
> 
> 
> 
> 
> 
> 
> 
> 
> =====
> synthfreak(parallel worlds)
> athens-greece
> [Doepfer_a100] group owner-moderator
> 
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Web Hosting - establish your business online
> http://webhosting.yahoo.com

Hi Florian.

That's what I thought, but Dieter's reference to an "inverter" got 
me wondering.

I can solder, but I have a Trigger Modifier so no need. Come to 
think of it, I don't have an MCV24 yet :o

Joe
--- In Doepfer_a100@yahoogroups.com, Florian Anwander 
<Florian.Anwander@c...> wrote:
> Hi Joe 
> 
> > So you would patch the MCV24 Start/Stop through the Trigger
> > Modifier to the A155 Reset? Or is it the Voltage Inverter?
> The Trigger Modifier. 
> 
> If you are able to solder, this, this is done by a transistor and 
two

> resistors.
> 
> Florian

Hi Joe 

> So you would patch the MCV24 Start/Stop through the Trigger
> Modifier to the A155 Reset? Or is it the Voltage Inverter?
The Trigger Modifier. 

If you are able to solder, this, this is done by a transistor and two
resistors.

Florian

:)))))))))))))))))))))))))))))

--- In Doepfer_a100@yahoogroups.com, Florian Anwander 
<Florian.Anwander@c...> wrote:
> Hi Bakis 
> 
> > it needs the trigger modifier!if you patch the
> > start/stop output thru the voltage inverter you will
> > have a 0 volts to -5 volts trigger...
> He might use a cv inverter, feed the output to a mixer and add 5 
volts...
> 
> For useful suggestions like this we have a proverb in Germany "You 
may also

> drill a hole in your knee and plant salad in it..." ;-))
> 
> 
> Florian

it needs the trigger modifier!if you patch the
start/stop output thru the voltage inverter you will
have a 0 volts to -5 volts trigger...
bakis.


--- Joe Buechler <buechlerjoe@toadmail.com> wrote:
> So you would patch the MCV24 Start/Stop through the
> Trigger 
> Modifier to the A155 Reset? Or is it the Voltage
> Inverter?
> 
> --- In Doepfer_a100@yahoogroups.com, Bakis Sirros 
> <synth_freak_2000@y...> wrote:
> > 
> > > ----- Original Message -----
> > > From: "Dieter Doepfer" <hardware@d...>
> > > To: "Bakis Sirros" <syrros@a...>
> > > Sent: Tuesday, March 11, 2003 11:48 AM
> > > 
> > > 
> > > > Hi Bakis,
> > > >
> > > > in one of your forum messages you wrote:
> > > >
> > > > ".... the mcv24 has a clock output but not a
> reset
> > > output that is
> > > essentials for
> > > > syncing the a100 sequencers.(the mcv24 has a
> > > start/stop output that i
> > > haven't
> > > > use with any of the
> > > > a100 modules.it may be of use with old drum
> > > machines ...."
> > > >
> > > > The only difference between reset and
> start/stop
> > > is the polarity.
> > > >
> > > > Stop state: Reset = high, Start/Stop = low
> > > > Running state: Reset = low, Start/Stop = high
> > > >
> > > > With the usage of a inverter you could use the
> > > MCV24 to generate the reset
> > > > signal too.
> > > >
> > > > The reason for both type of signals is
> history:
> > > Roland used the Start/Stop
> > > > signal in the Roland Sync standard (high while
> > > running, low during stop).
> > > Other
> > > > manufacturers used the reset signal (low while
> > > running, high during stop).
> > > >
> > > > Dieter
> >   
> > 
> > SORRY GUYS...DIETER KNOWS BETTER,THEN... :-))
> > BAKIS.
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > 
> > =====
> > synthfreak(parallel worlds)
> > athens-greece
> > [Doepfer_a100] group owner-moderator
> > 
> > __________________________________________________
> > Do you Yahoo!?
> > Yahoo! Web Hosting - establish your business
> online
> > http://webhosting.yahoo.com
> 
> 


=====
synthfreak(parallel worlds)
athens-greece
[Doepfer_a100] group owner-moderator

__________________________________________________
Do you Yahoo!?
Yahoo! Web Hosting - establish your business online
http://webhosting.yahoo.com

Hi Bakis 

> it needs the trigger modifier!if you patch the
> start/stop output thru the voltage inverter you will
> have a 0 volts to -5 volts trigger...
He might use a cv inverter, feed the output to a mixer and add 5 volts...

For useful suggestions like this we have a proverb in Germany "You may also
drill a hole in your knee and plant salad in it..." ;-))


Florian

Florian Anwander wrote:

> If you are able to solder, this, this is done by a transistor and two
> resistors.
>
> Florian

That´s all an inverter is made of?
Can you get a little more specific? Perhaps in form of a small schematic 
uploaded to the files section.

thanks,
Paul