Doepfer

So you would patch the MCV24 Start/Stop through the Trigger 
Modifier to the A155 Reset? Or is it the Voltage Inverter?

--- In Doepfer_a100@yahoogroups.com, Bakis Sirros 
<synth_freak_2000@y...> wrote:
> 
> > ----- Original Message -----
> > From: "Dieter Doepfer" <hardware@d...>
> > To: "Bakis Sirros" <syrros@a...>
> > Sent: Tuesday, March 11, 2003 11:48 AM
> > 
> > 
> > > Hi Bakis,
> > >
> > > in one of your forum messages you wrote:
> > >
> > > ".... the mcv24 has a clock output but not a reset
> > output that is
> > essentials for
> > > syncing the a100 sequencers.(the mcv24 has a
> > start/stop output that i
> > haven't
> > > use with any of the
> > > a100 modules.it may be of use with old drum
> > machines ...."
> > >
> > > The only difference between reset and start/stop
> > is the polarity.
> > >
> > > Stop state: Reset = high, Start/Stop = low
> > > Running state: Reset = low, Start/Stop = high
> > >
> > > With the usage of a inverter you could use the
> > MCV24 to generate the reset
> > > signal too.
> > >
> > > The reason for both type of signals is history:
> > Roland used the Start/Stop
> > > signal in the Roland Sync standard (high while
> > running, low during stop).
> > Other
> > > manufacturers used the reset signal (low while
> > running, high during stop).
> > >
> > > Dieter
>   
> 
> SORRY GUYS...DIETER KNOWS BETTER,THEN... :-))
> BAKIS.
> 
> 
> 
> 
> 
> 
> 
> 
> =====
> synthfreak(parallel worlds)
> athens-greece
> [Doepfer_a100] group owner-moderator
> 
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Web Hosting - establish your business online
> http://webhosting.yahoo.com