Doepfer

I have recently acquired a Doepfer A190-4 USB/MIDI CV/GATE module and installed it in my Make Noise Shared System (black/gold) which is connected to my Mac Pro via USB using Logic Pro 9.1.8.

When I try to record via the USB connection, I get all sorts of stuck notes and MIDI feedback (for lack of a better tern). Example, I put A190-4 track in record and press a key on my MIDI keyboard the note gets recorded and never stops and continues to record over and over even though I have lifted my finger off of the key, I press a second key and second key gets recorded and never stops in addition to the 1st key, etc. It feels like a MIDI loop or feedback. In normal circumstances one would turn off "MIDI Thru" on a given instrument. Unfortunately the A190-4 has no such function. Using the MIDI connection with the A190-4 there are no issues but I have no available MIDI ports on my patch bay hence why I would like to make the USB port work.

The other logical place I looked was the "Audio MIDI Setup" app but unfortunately here the A190-4 ports (in/out) are grayed out so I can not turn the MIDI OUT to off.

Ive emailed Doepfer and they in short stated that there is a feedback issue that happens with the USB port and they will consider fixing it with the next update?? (not the answer I was hoping for)

Anyone have any suggestions as how to stop this from happening?

Hello


Am 09.07.2015 um 23:08 schrieb bomarm@yahoo.com [Doepfer_a100]:
> The other logical place I looked was the "Audio MIDI Setup" app but 
> unfortunately here the A190-4 ports (in/out) are grayed out so I can 
> not turn the MIDI OUT to off.
You should not turn off the output, but the input! You don't want to 
receive MIDI data, that come in via USB from the A-190-4

I don't know about Logic 9, but in Logic 7 I can do that for every class 
compliant device in the songs MIDI-properties

Florian