Doepfer

Hi, I am a newbie who is just starting up. I have the Doepfer A-100BS2 and am starting to fill and LC9. I bought an A-188-1 and think I have made a mistake. On the panel is states that it is an A-188-1 but none of the stages are marked? I cannot see anything like this listed anywhere. Some guidance on this would really be appreciated.

Regards, Tim.

Hello

Am 15.04.2014 14:39, schrieb Monolith Studios:
> Hi, I am a newbie who is just starting up. I have the Doepfer
> A-100BS2 and am starting to fill and LC9. I bought an A-188-1 and
> think I have made a mistake. On the panel is states that it is an
> A-188-1 but none of the stages are marked? I cannot see anything like
> this listed anywhere. Some guidance on this would really be
> appreciated.

You may have a look at the pcb of the module. There is a chip on it 
which should be named like "MN threethousandsomething". Here is a list 
of the available modules:

     A-188-1X with 128 stages BBD (MN3006/MN3206),
     A-188-1Y with 256 stages BBD (MN3009/MN3209),
     A-188-1A with 512 stages BBD (MN3004/MN3204),
     A-188-1B with 1024 stages BBD (MN3007/MN3207/BL3207),
     A-188-1C with 2048 stages BBD (MN3008/MN3208/BL3208),
     A-188-1D with 4096 stages BBD (MN3005/MN3205),

The list can be found at http://www.doepfer.de/A1881.htm

Florian

Hi I think you also could buy À-188 without chip and therefor there are no marking just check if there area chip or not

Skickat från min iPhone

> 15 apr 2014 kl. 14:39 skrev Monolith Studios <monolith_studios@yahoo.co.uk>:
> 
> Hi, I am a newbie who is just starting up. I have the Doepfer A-100BS2 and am starting to fill and LC9. I bought an A-188-1 and think I have made a mistake. On the panel is states that it is an A-188-1 but none of the stages are marked? I cannot see anything like this listed anywhere. Some guidance on this would really be appreciated.
> 
> Regards, Tim.
> 
>