Doepfer

Hi Folks

 

I have posted a lot of Euro stuff for sale via the Muffs Forum same user ID, not sure if I'm allowed to link to the other site so have cut and pasted below. 

 

If interested in anything please contact me off list

 

Thanks

 

David

 

So I have decided to strip down my Euro system as I have a very nice Halliburton case that's almost ready. 

First up there are three cases: 
Synthbox Spacecase - Perspex case equal to 12U with rails - no distro's or PSU it has damage on it but is solid. £75 

The damage consists of a crack in one of the side panels and upper right corner.. 

Here's a link to the original case details 
http://www.ear-group.net/spacecase.html 
http://www.ear-group.net/spacecase.html> <http://www.ear-group.net/spacecase.html%3E>  

 

Next are the two dark wood cases in the image below for that Moog 55 look: 

The top one is equal to 12U and was made by EMIS, made from furniture board I think? it has 4 Doepfer buss boards, two Doepfer PSU's all wired to a single mains input. This case doesn't use rails but has wooden batons that takes wood screws. 
£200 

Second (lower case) has three rows so equal to 18U, Solid wood (not pine) has Doepfer distros and a big Condor linear open frame PSU. 
£250 

 

The lower two cases in this pic 

 

Module list: 

Doepfer 
A-104 - Quad Res. Filter (Trautonium) - £100 
A110 - Standard VCO - £90 - On hold for Microscopial 
A110 - Standard VCO - £90 
A110 - Standard VCO - £90 
A115 - Divider - £45 
A116 - Waveform Processor - £45 
A121 - LPF - £72 
A122 - SVF - £100 - Stock running out 
A122 - SVF - £100 - Stock running out 
A123 - Curtis LPF - £69 
A124 - Curtis HPF (no longer available) - £95 
A125 - VC Phase Shifter - £63 
A126 - VC Frequency Shifter (no longer available) - £80 On hold for Mig27 
A127 - Triple Res VCF - £100 On hold for Mig27 
A129-3 - 5xAttenuator/Offset/Slew Limiter - £78 
A131 - VCA £30 
A131 - VCA £30 
A131 - VCA £30 
A134-1 - VC Panner - 53 
A136 - Distortion/Waveshaper - £45 
A137-2 - VC Wave Multiplier II - £55 
A138a - Lin Mixer - £35-£40 
A138b - Exp Mixer - £35-£40 
A138d - Crossfader/ FX insert - £43 
A144 - Morphing controller - £37 
A155 - Sequencer £172 
A163 - VC Freq Divider - £45 
A170 - Slew - £45 
A177-2 - Foot Controller - £35 
A178 - Theremin Controller - £58 
A180 - £18 
A185-1 - Bus Access - £18 
A189-1 - VC Bit Modifier - £60 On hold for Mig27 
A190 - Midi to CV interface - £90 

Analogue Systems 
RS50 - Shaper/Trigger/DC Shifter - £75 
RS60 - VC Envelope - £86 
RS70 - Inverter/Preamp - £75 
RS80 - VC LFO - £80 
RS90 - VCO - £100 
RS90 - VCO - £100 
RS95 - VCO - £110 On hold for Microscopial 
RS110 - Multimode VCF - £86 
RS120 - Comb Filter - £90 
RS180 - VCA - £64 
RS310 - Reverb/Chorus - £100 

Various Euro 
Elby - CGS735 - Synthacon Filter - £110 
Division 6 - Filtre SEIII - SSM Type Multimode VCF - £135 ON Hold for Cheapmachines 
Blacet - Klagwerk - Ringmod (converted to Euro with both Euro and Frac powerleads) - £135 On Hold PhineasFreak 
MFB - VD01 - Video display (I'll throw in a 5" LCD) - £100 
Synthwerks - USB Lamp 1 - £35 
Din Sync - TB303 VCO - £100 - On Hold mckenic 
Modcan - Touch Sequencer - £380 
Livewire - AFG - £250 
Voxglitch PG16 (no longer available) - Pattern Generator - £60 
Voxglitch CVGEN (no longer available) - CV Generator - £60 On hold for robbert 

PM me if your interested in anything 
Prices do not include postage 
Prefer Bank Transfer or you pick up Paypal fees 
Will allow haggling if your taking 4 plus modules 
No trades at present as this lot is to fund my foray into a new synth format. 

Thanks for looking
_________________

 

· · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · · ·
David Salter
Senior Consultant

Solutions Services EMEA North

Thomson Reuters

O +44 (0)20 7542 2402X 52402
M 07990562402

david.salter@thomsonreuters.com
thomsonreuters.com <http://thomsonreuters.com/> 


This email was sent to you by Thomson Reuters, the global news and information company. Any views expressed in this message are those of the individual sender, except where the sender specifically states them to be the views of Thomson Reuters.

[Non-text portions of this message have been removed]