Synth-DIY Yahoo! Groups Archives

simple idea regarding the A148 S/H module.

2010-10-28 by Bakis Sirros

ok, this is super obvious, but, anyway:

why not have your S/H output random voltages in irregular timing too?

so, connect your S/H source (say a vco triangle wave) into a comparator and connect the comparator output to the sync input of the vco (or the reset input of the a145 lfo) that is clocking the S/H. now the clock of the S/H is synced to the S/H voltage source. now you have a series of staircase voltages (or random if you input noise to the S/H) with irregular timing of the voltage steps as well, somehow related to the S/H output voltages. got this idea from the 'weird' sync feature of the S/H section of the Korg PS-3100.


Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist
[Doepfer_a100] group owner
www. parallel - worlds - music. com
www. myspace. com/ parallelworldsmusic
www. myspace. com/ interconnectedmusic
www. myspace. com/ memorygeist
www. DiN. org. uk
www. musicamaximamagnetica. com
www. vu-us. com

RE: [Doepfer_a100] simple idea regarding the A148 S/H module.

2010-10-28 by david.salter@thomsonreuters.com

Thanks Bakis, nice idea.

 

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* * *
David Salter
Senior Consultant

SSG UKI

Thomson Reuters

O +44 (0)20 7542 2402X 52402
M 07990562402

david.salter@thomsonreuters.com
thomsonreuters.com <http://thomsonreuters.com/> 

 

P Please consider the environment before printing this e-mail 

 

________________________________

Show quoted textHide quoted text

From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
On Behalf Of Bakis Sirros
Sent: 28 October 2010 13:45
To: Doepfer_a100 group
Subject: [Doepfer_a100] simple idea regarding the A148 S/H module.

ok, this is super obvious, but, anyway:

why not have your S/H output random voltages in irregular timing too?

so, connect your S/H source (say a vco triangle wave) into a comparator
and connect the comparator output to the sync input of the vco (or the
reset input of the a145 lfo) that is clocking the S/H. now the clock of
the S/H is synced to the S/H voltage source. now you have a series of
staircase voltages (or random if you input noise to the S/H) with
irregular timing of the voltage steps as well, somehow related to the
S/H output voltages. got this idea from the 'weird' sync feature of the
S/H section of the Korg PS-3100.

Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist
[Doepfer_a100] group owner
www. parallel - worlds - music. com
www. myspace. com/ parallelworldsmusic
www. myspace. com/ interconnectedmusic
www. myspace. com/ memorygeist
www. DiN. org. uk
www. musicamaximamagnetica. com
www. vu-us. com

This email was sent to you by Thomson Reuters, the global news and information company.
Any views expressed in this message are those of the individual sender, except where the sender specifically states them to be the views of Thomson Reuters.

[Non-text portions of this message have been removed]