Yahoo Groups archive
Messages
Page 4 of 564 · 28179 messages matched
2019-01-29 by yahoo@doepfer.de
The A-149-1 generates quantized/stored random voltages similar to the Buchla module (i.e. the voltage changes at each rising edge of the incoming clock signal). If you want to obtain triggers you may use a voltage controlled switch (e.g. A-150) that follows the A-149-1 output in
2019-01-29 by Mikael Kopimi Altemark
Hey James - did you eventually end up trying out the mod? On Thu, Feb 7, 2013 at 6:07 PM James Husted james.husted@mac.com > wrote: Let me try it out first. It is very simple. It will be based on a variation of this circuit fragment - https://www.dropbox.com/s/d4zuu4p62nvwccn/dri
2019-01-29 by Mikael Kopimi Altemark
Did anyone try to come up with something to solve this? Cheers On Wed, Jun 22, 2011 at 7:08 PM sirolffoonav florisvanhoof@ecomail.org > wrote: dear all, would it be possible to make the A-149-1 Quantized/Stored Random Voltages output narrower? now the pulses are too long, it woul
2019-01-07 by man.of.mystery@ntlworld.com
Thanks, Dieter. That's very useful to know. I've just got it home, from the collection point shop I had it delivered to. It looks good. I was initially told my parcel had already been collected - containing that and some other things I bought from Thomann. It took quite a while b
2019-01-07 by yahoo@doepfer.de
Hi Andy, you find my answers written inline. Best wishes Dieter Doepfer > Hi Dieter, > > Thanks. Are the outputs always a positive voltage? The Gate and the pressure CV are always positive. The position CV becomes slightly negative (about -1V with the scale control fully CW) in t
2019-01-07 by man.of.mystery@ntlworld.com
Hi Dieter, Thanks. Are the outputs always a positive voltage? The Behringer Model D manual states that exceeding the rated input voltages can damage it. I have no way of knowing if that's true, because I haven't seen the schematics of that either, but I'd rather not rely on it be
2019-01-07 by yahoo@doepfer.de
For each output a scale control is available to adjust the scale of the output in question. It also limits the max. voltage. With the controls fully CCW the max. voltage is close to +12V. To limit the voltage to +5V the controls have to be adjusted to about position 4. I'm not fa
2019-01-07 by yahoo@doepfer.de
None of the Doepfer A-100 modules can be damaged with +12V gate/trigger level. Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] > Gesendet: Donnerstag, 3. Januar 2019 19:45 > An: Doepfer_a100@
2019-01-04 by man.of.mystery@ntlworld.com
I've ordered the A-198 Trautonium manual / ribbon controller, and will hopefully get it early next week. I looked in the manual, and on the main web page, expecting to see what the output voltage ranges are for the two CV and two Gate outputs - but I don't see any mention of them
2019-01-03 by exakoustidismiltiadis@hotmail.com
Dieter thank you very much for your answer! No, the outputs you mentioned are +5V. I suppose that changing the level to +12V are not going to damage the other modules, mostly Doepfer. At first I will offset the signal of the clock output of Dark Time and I will report here! Best
2019-01-02 by yahoo@doepfer.de
Thank's for the note. You can see the prototype in an Youtube video recorded at SchneidersLaden in Berlin in December (the dynamic LED control start about at 6:40): https://www.youtube.com/watch?v=II5KIKVllB0 You can visit also the A-100 cookie workshop :-) https://www.youtube.co
2019-01-02 by yahoo@doepfer.de
Hello, please make sure that the output level of the Gate/Clock/Reset/Start/Stop outputs is set to +12V (not +5V). And make sure that the frequency of the A-147-2 is not too low. The frequency of the A-147-2 should be not much less than the clock signal coming from the Dark Time.
2018-12-31 by Diego Ragnini
At given circumstances I had found quite useful to modulate some eurorack modules from Silent Way plug-ins, which also allow to do the other way out: to control virtual instruments from the eurorack modules. I recently discovered that Softube provided us with a new environment (t
2018-12-30 by Florian Anwander
There is something unusual coming: http://www.doepfer.de/a1973.htm It is a controller for LED-strips. I think it might be extremely cool to have LED-Strips triggered by a sequencer. -- http://www.florian-anwander.de/
2018-12-25 by exakoustidismiltiadis@hotmail.com
Hello and happy christmas to everyone, I am using an external clock e.g from dark time to sync/reset the A147-2, as soon as I am increasing the frequency knob of the lfo, the outputs are in perfect sync with the external clock. As soon as I am decreasing the frequency knob I have
2018-12-22 by Bakis Sirros
hi, please, only in english in this group. thanks,Bakis. On Saturday, December 22, 2018, 8:31:09 PM GMT+2, magmodular@gmail.com [Doepfer_a100] wrote: Bonjour, je me demandais si quelqu'un avait des informations sur ce système, je l'avais vu au festival B-Wave en Belgique, mais je
2018-12-22 by magmodular@gmail.com
Thank you, I'm sorry, I do not know how to post pictures for what are visible
2018-12-22 by syndromeda@telenet.be
It is the personal system of Florence Michel who lives in the south of Belgium. Regards, ------------------------------------------------------ Danny Budts info@syndromeda.be www.syndromeda.be https://www.facebook.com/Syndromeda https://www.facebook.com/SyndromedaPhoto/ https://s
2018-12-18 by Diego Ragnini
Just to clarify After my enquiry on this list I have had the chance to try an LMK2+ 8 years old and the keybed was absolutely silent, they keybed soft and responsive So the rumours I had found on a forum about resonant clunky keybed, on my opinion, are just rant. Yesterday I have
2018-12-17 by Alex
Thank you so much Dieter. That's what I wanted to hear. Sold. Cheers El lun., 17 dic. 2018 a las 16:52, yahoo@doepfer.de [Doepfer_a100] ( Doepfer_a100@yahoogroups.com >) escribió: Hello, I don't see a problem as the A-100MC uses an external power supply (transformer). You only ha
2018-12-17 by yahoo@doepfer.de
Hello, I don't see a problem as the A-100MC uses an external power supply (transformer). You only have to pay attention that there is sufficient distance between the supply and the reverb tank (and that there are no other magnetic troublemakers near the reverb tank). Best wishes
2018-12-17 by Alex
Hi all, I am considering buying a A-199 Spring Reverb module and put it into a A-100 Mini Case. Of course, the Spring Tank would be outside of the box but I am worried about the hum noise considering what the manual says: As the hum noise is mainly caused by the magnetic field of
2018-12-12 by JS Home
Probably the transformer. PSU1s were prone to becoming noisy in this way in my experience Jonathan Shapero Sent from my iPhone > On 11 Dec 2018, at 16:40, Diego Ragnini diegora@free.fr [Doepfer_a100] wrote: > > > > What is the module concerned by this sound output? The one you he
2018-12-12 by yahoo@doepfer.de
Do you speak about a mechanical sound (coming from the case, not connected to mixer/amplifier/loudspeaker) or an electrical noise coming from the modules ? Which power supply is built in (A-100PSU2 or A-100PSU3) ? Best wishes Dieter Doepfer > Hi I have a P-9 that makes a high pit
2018-12-12 by man.of.mystery@ntlworld.com
Sorry; I failed to sanitise that link properly. I'm not sure it works with the out of date sid bit on the end. That should have said: https://www.muffwiggler.com/forum/viewtopic.php?t=27314 - Andy
2018-12-12 by man.of.mystery@ntlworld.com
My first thought was a whining DC-DC converter, but I think they are linear power supplies, so probably not. Also, I thought you meant signal noise. I guess it could be a buzzing transformer, but I wasn't aware that could give a high pitched sound. I don't know if this helps, but
2018-12-11 by Diego Ragnini
ah so, he wrote about hz measuring and this was misleading to me Inviato da iPhone > Il giorno 11 dic 2018, alle ore 20:35, Florian Anwander fanwander@mnet-online.de [Doepfer_a100] ha scritto: > > I think he talks about a "mechanical" sound, not from the electric signal. > >> Am
2018-12-11 by Florian Anwander
I think he talks about a "mechanical" sound, not from the electric signal. Am 11.12.18 um 17:40 schrieb Diego Ragnini diegora@free.fr [Doepfer_a100]: What is the module concerned by this sound output? The one you hear the sound from, I mean… Or just any module featuring an audio
2018-12-11 by exakoustidismiltiadis@hotmail.com
Thank you very much Dieter for your valuable info! Best regards Miltos
2018-12-11 by Diego Ragnini
What is the module concerned by this sound output? The one you hear the sound from, I mean… Or just any module featuring an audio output jack? > Il giorno 11 dic 2018, alle ore 17:33, kazys varnelis kvarnelis@gmail.com [Doepfer_a100] ha scritto: > > > Hi I have a P-9 that makes a
2018-12-11 by kazys varnelis
Hi I have a P-9 that makes a high pitched sound at the edge of my hearing (12-13000Hz or so). I have three others, none of them make it. It decreases as I unplug modules, but with half of them unplugged, it is still faint. It doesn't appear to be any module in particular. The bus
2018-12-11 by yahoo@doepfer.de
Hello, the jumpers are used to choose between DC coupling (jumper installed) and AC coupling (jumper removed) of signal input 1 (JP3, next to C2) and signal input 2 (JP4, below C4). Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com
2018-12-10 by exakoustidismiltiadis@hotmail.com
Hello, I didn't found any info about the jumper in the circuit board and I ask here what is the meaning of the jumper! Thanks in advance Miltos
2018-12-10 by yahoo@doepfer.de
Hello, you find my comments written inline. Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] > Gesendet: Donnerstag, 6. Dezember 2018 11:39 > An: Doepfer_a100@yahoogroups.com > Betreff: [Doepf
2018-12-10 by yahoo@doepfer.de
> Hello. > > I just realized that neither of the note priority modes of > A-190-4 (highest note nor last note) is what I'm used to with > some other synths in their legato mode. > Or maybe it's more precise to say that the last note priority > doesn't work as I expect it to work.
2018-12-10 by yahoo@doepfer.de
You find my answers written inline. Best wishes Dieter Doepfer > So from time to time complaints about the A-137-1 pop up on > Muffwiggler, which made me investigate the module a bit more. > It's clear that it's nearly impossible to get the input signal > back out unaltered, beca
2018-12-10 by yahoo@doepfer.de
> Does anyone know what's new in Firmware update 1.3-V1.6_170801 > for the A-157 module? Please contact Christian Assall (software@doepfer.de). He knows such details. Best wishes Dieter Doepfer
2018-12-09 by man.of.mystery@ntlworld.com
You're welcome, Scott. I'm glad that was the solution :) Yes, it's confused me a bit when I've wanted to change it too. It seems like I should know how, because I've done it before, but I still tend to have to puzzle over the instructions. Maybe they just lost something in transl
2018-12-09 by Scott Rogers
Andy, WOW! That worked!!! I had no idea. I find the manual confusing and never realized that was the problem. Even now I was trying to figure out how to set this (reading the manual) and it took quite a while but now all is good! No idea how it ever got changed but it probably ha
2018-12-08 by man.of.mystery@ntlworld.com
Scott, What do you have the reference note set to? I'm not familiar with the A-190-1, but on the A-190-2, I press the button to get into Learn mode, then press a key to send the lowest note I want to be able to play ("reference note"). It then accepts 5 complete octaves, starting
2018-12-08 by Florian Anwander
Am 08.12.18 um 15:24 schrieb ville@oikarinen.org [Doepfer_a100]: The highest note mode works like this: if I press down C and then D, the D will sound until I release it. After releasing it C will continue to sound. But in the last note mode, when I release a note, the synth goes
2018-12-08 by Scott Rogers
On a similar subject, I have a 190-1. The highest note it responds to is B-7. Does that sound correct? Seems strange that it doesn’t got to C-8. That’s the top note on every midi keyboard I have and it’s a note I use a LOT!! Seems like an odd choice to leave just one note that do
2018-12-08 by man.of.mystery@ntlworld.com
I have the same problem with my A-190-2 - I would like to be able to use Last Note priority, but it doesn't work as I would want it to. Since releasing a key doesn't return to playing a previously held key, hitting the edge of the next key by accident kills the note I wanted to p
2018-12-08 by ville@oikarinen.org
Hello. I just realized that neither of the note priority modes of A-190-4 (highest note nor last note) is what I'm used to with some other synths in their legato mode. Or maybe it's more precise to say that the last note priority doesn't work as I expect it to work. I expect it t
2018-12-08 by rigo.schoeters@yahoo.com
So from time to time complaints about the A-137-1 pop up on Muffwiggler, which made me investigate the module a bit more. It's clear that it's nearly impossible to get the input signal back out unaltered, because whatever the settings the signal goes through 4 folding stages. But
2018-12-08 by karelvanbezooijen@yahoo.com
Does anyone know what's new in Firmware update 1.3-V1.6_170801 for the A-157 module?
2018-12-06 by Diego Ragnini
Hello, please is it possible to know since when it features the Fatar TP/40GH keybed ? I have read that pre 2011 versions used another model (TP10/MDR) On the same forum few users had complained for a supposed clunking noise while triggering the keys at low volume control room, r
2018-11-18 by exakoustidismiltiadis@hotmail.com
Ok Dieter thank you very much, I am waiting for it!
2018-11-15 by yahoo@doepfer.de
I hope that the first batch will be sent to our international distributor (Alex4 in Berlin) early in December. It depends upon the pre-orders of the shop in question when the module will be available in the shop. Best wishes Dieter Doepfer > -----Ursprüngliche Nachricht----- > Vo
2018-11-15 by exakoustidismiltiadis@hotmail.com
Thank you Dieter for your invaluable information! Do you know when this module will be at shops? Best regards Miltos