Doepfer

Ohh, it can very much be used to full effect without the /4, but I second
the motion that a smaller offset module should be great. And in that case I
should wish for one that not only attenuates but also has the capacity to
boost signals preferrably switched so you could set the maximum output to
either +5v or +12v or +15v so you don't accidentally blow up other modules.
Dual attenutator... hmm, looking at the jack and knobs it seems to me like
it would be possible for something like a 2 input four output in a unit
about the size of the a111. I wouldn't hesitate to buy one of those when I
expand. Time for a new module and feautes vote here Bakis?


----- Original Message -----
From: "code_pig" <code_pig@yahoo.com>
To: <Doepfer_a100@yahoogroups.com>
Sent: Friday, March 21, 2003 1:14 PM
Subject: [Doepfer_a100] Re: Offset module


> Actually, I just wanted a dual offset module because I really don't
> need (or have room for) and A129/3.
>
> I mean, I don't want to whine, but I really don't think it should be
> necessary for one to purchase the A129/3 (which really can't be fully
> expolited without the A129/4 Controller) when all one may need is a
> couple of offset generators.
>
> Regards,
> Kevin
>
> --- In Doepfer_a100@yahoogroups.com, "jmaddocks1975"
> <jmaddocks1975@y...> wrote:
> > Hi,
> > I agree, this is something I am looking at building.
> > My a129 never gets used and I really want a fixed filter, so if I
> can
> > make a module with 15 pots to control the a129/2 I got one.
> > Any ideas of best way to make it?
> >
> > John
> > --- In Doepfer_a100@yahoogroups.com, "pstnotpd" <psm@w...> wrote:
> > > Wouldn't that be fairly easy to make yourself? A number of pots
> 15
> > > running from the internal power. Something like a CV source+ so
> > that
> > > the 129 could be used as a filter bank, but much cheaper an space
> > > consuming.
> > > Or am I getting you wrong?
> > >
> > >
> > > --- In Doepfer_a100@yahoogroups.com, "code_pig" <code_pig@y...>
> > wrote:
> > > > This might have already been discussed, but...
> > > >
> > > > I know the A129/3 does offsets, but might there be room for
> > > something
> > > > like a simple dual offset generator module?
> > > >
> > > > Regards,
> > > > Kevin
>
>
>
> To unsubscribe from this group, send an email to:
> doepfer_a100-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>