Doepfer

> Hello,
>
> The pulse wave of PVCO at lfo speed doesn't work well with the
> A-160 clock divider on my system. It skips beats and stutters. I
> tried to send the pulse through the trigger modifier module but
> that did not help. A-160 works with everything else. I have the
> pVCO connected to the CV bus (receiving from the precision
> adder). Could that have any effect? Thanks,
>
> Cheers,
>
> Martin

From the theory it should work - at least with a pulsewidth not close to 0%
or 100% (e.g. 10% - 90% should work). I'll have to try out the
A-111-3/A-160-1 combo. Unfortunately I have no A-111-3 left because the
first production series is completely sold out. But I'll try an A-111-2
which uses nearly the same circuitry.

Best wishes
Dieter Doepfer