Yahoo Groups archive

Doepfer

Index last updated: 2026-04-29 00:15 UTC

Message

Re: AW: [Doepfer_a100] A-113

2016-04-30 by Jacco Ville

Hahaha... LOL 

...." Don't mention the war"... (John Cleese)

Cheers 

Jacco 

Verstuurd vanaf mijn iPhone 5 Black OPS Edition

> Op 30 apr. 2016 om 08:35 heeft Bakis Sirros synth_freak_2000@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> het volgende geschreven:
> 
> the official language of this group is English.
> 
> thank you,
> Bakis.
> 
> 
> 
> 
> From: "Alexander Wassermann aua130@yahoo.de [Doepfer_a100]" <Doepfer_a100@yahoogroups.com>
> To: Doepfer_a100@yahoogroups.com 
> Sent: Saturday, April 30, 2016 8:12 AM
> Subject: Re: AW: [Doepfer_a100] A-113
> 
>  
> OK, Danke Dieter.
> 
> Dann bringe ich das Modul nach Gräfelfing, ich wohne nicht weit weg.
> 
> BG,
> Alex
> 
> Von meinem iPad gesendet
> 
>> Am 29.04.2016 um 10:08 schrieb yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com>:
>> 
> 
>>  
>> > Hi group,
>> >
>> > I haven't used my sub harmonic oscillator for some time but reinstalled it recently, albeit without success. First I
>> > thought I had an issue with the 5 V but that was not the problem. I just cannot get any sound out of the single or mix
>> > output, no matter what I feed into the input and which divider settings I use. If I crank the volume up I can barely hear
>> > some oscillation sound, also the effect of altering the divisions but always with one stable frequency dominating (again,
>> > no matter what the input frequency identification, or what the divider settings are).
>> >
>> > Any ideas or should I send the module in for inspection?
>> >
>> > Best regards,
>> > Alex
>> 
>> Sorry for the troubles with the module. If the +5V are OK the module has to be repaired (but only the old version of the module with
>> 16 pin bus connector required the +5V). For details please refer to the repair notes on the FAQ page of our website.
>> Maybe the processor is defective (but that's only a guess). But in this case the display and the buttons would not work anymore. If
>> the display and the buttons are still working it's another fault.
>> 
>> Best wishes
>> Dieter Doepfer
> 
> 
> 
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.