Doepfer

Yes, always one of the first checks (and actually one of the only ones I can perform - I have no DIY ambitions or skills).

BR,
Alex

Von meinem iPad gesendet

> Am 28.04.2016 um 21:09 schrieb Jacco Ville jaccoville@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com>:
> 
> Hello Alex,
> 
> First thing in mind....
>  did you check all the (ribbon)connections?
> 
> Jacco
> 
> Verstuurd vanaf mijn iPhone 5 Black OPS Edition
> 
>> Op 28 apr. 2016 om 18:35 heeft Alexander Wassermann aua130@yahoo.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com> het volgende geschreven:
>> 
>>  
>> Hi group,
>> 
>> I haven't used my sub harmonic oscillator for some time but reinstalled it recently, albeit without success. First I thought I had an issue with the 5 V but that was not the problem. I just cannot get any sound out of the single or mix output, no matter what I feed into the input and which divider settings I use. If I crank the volume up I can barely hear some oscillation sound, also the effect of altering the divisions but always with one stable frequency dominating (again, no matter what the input frequency identification, or what the divider settings are).
>> 
>> Any ideas or should I send the module in for inspection?
>> 
>> Best regards,
>> Alex
>> 
>> Von meinem iPad gesendet
> 
>