Doepfer

I guess I have to go to the Doepfer page more often!
-J

> On Jun 1, 2015, at 11:59 AM, achtung_999 heinrich.himmelwasser@gmail.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
> 
> 
> 
> --cough---
> 
> http://www.doepfer.de/a138u.htm <http://www.doepfer.de/a138u.htm>
> 
> On Mon, Jun 1, 2015 at 7:29 PM, james.husted@mac.com <mailto:james.husted@mac.com> [Doepfer_a100] <Doepfer_a100@yahoogroups.com <mailto:Doepfer_a100@yahoogroups.com>> wrote:
> Dieter -
>  I would think about also make the opposite of a buffered multiple - a unity summer. Dual three inputs and one output sections normalized to each other. It is often needed when transposing sequencers or other sources to destinations that don’t have multiple 1V/oct inputs. I know a mixer can be used to do this but a 1:1 summing module would do it easier with no adjustments needed. As far as I know there are very few of them on the market (intellijel and Xaos make them).
> -James
> 
> 
> 
> > On Jun 1, 2015, at 5:34 AM, yahoo@doepfer.de <mailto:yahoo@doepfer.de> [Doepfer_a100] <Doepfer_a100@yahoogroups.com <mailto:Doepfer_a100@yahoogroups.com>> wrote:
> >
> >> I am no designer, but instead of designing a new panel, why not do a A-180-3? Same design as the 180-1 but active?
> >
> > In the A-180-1 all sockets are equal because they are simply connected (a passive module). In a buffered multiple you have to
> > distinguish between the input and the outputs. Consequently a different panel is required (same psition of the holes, but different
> > silk screen printing to show the in/outputs). A bit like the A-138u panel but reverse, i.e. 2 x (1 input and 3 outputs) instead of 2
> > x (3 inputs and 1 output).
> >
> > Best wishes
> > Dieter Doepfer
> >
> 
> 
> 
> ------------------------------------
> 
> ------------------------------------
> 
> 
> ------------------------------------
> 
> Yahoo Groups Links
> 
> 
> 
> 
> 
> 
>