Got my A132-4 last week and just wanted to check something with you knowledgeable folks.
I ws feeding output from A140 ADSR into CV,1 audio in from filter, out to external mixer. The output was *really* hot (loud). I had to route the signal via the attenuator module to keep it workable even with the faders turned almost to zero.
1. if I'm feeding in ADSR output on a regular basis, should I trim the potentiometer to handle 8V as suggested in the manual ? (yes, I did RTFM..haha).
2. Is it easier to route the A140 output via the A183-2 to attenuate the CV first before feeding into CV1 on A132-4 ?
I'm learning all the time, so appreciate the help.
Steve