Doepfer

Based on your description in this "clarifier", would a VC slew work?  Like the A-171?

Otherwise, and after reading the other messages in this thread, I still don't understand what you're trying to do. I thought perhaps Florian had seen through your description and realized you want a F->V convertor, but in your initial post you said you wanted a CV based on a CV.  Maybe it is not clear as you did not specify whether the first CV is stepped or smooth

Nick

Sent from the future

> On Nov 18, 2014, at 4:07 AM, "David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100]" <Doepfer_a100@yahoogroups.com> wrote:
> 
> I bought the uScale rather than the A156 because of its flexibility interns of scales and non scales from chromatic notes - so don't really want an A156.
> 
> The CV could be - for instance a Theremin where the cv goes out to a quantiser then through a slew / Portamento then to oscillator. The rate of change of the theremin output would control the rate of slew. Hope that makes sense. 
> 
> David
> 
> www.movingisliving.co.uk
> 
> Sent from my iPhone 
> 
>> On 18 Nov 2014, at 08:07, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
>> 
>>  
>> The closest to the second but would be the A-156 as when it quantizes it outputs a trigger. 
>> 
>> I'm not sure about the first part; what is causing the changing rate of the cv? 
>> 
>> Sent from my iPhone
>> 
>>> On 18 Nov 2014, at 07:38, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
>>> 
>>>  
>>> Hi,
>>> 
>>> I'm wondering how to do two things. 
>>> 1) To create a CV based (proportional to) on the rate of change of another CV
>>> 2) To create a gate when there is a step in a CV. This is particularly but not exclusively the output of a Intellijel uScale - so when there is a new pitch I would like to create a gate. 
>>> 
>>> Hoping there is maybe a simple solution,
>>> 
>>> David
>>> 
>>> www.movingisliving.co.uk
>>> 
>>> Sent from my iPhone
>>> 
> 
>