Doepfer

Yes the Elby would work. Thanks for pointing me at it. That would solve the Gate part. 

David

www.movingisliving.co.uk

Sent from my iPhone 

> On 18 Nov 2014, at 08:55, PW pulsewidth2@hotmail.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
> 
> Pretty sure this will get you gates every time cv changes:  
> 
> http://www.modulargrid.net/e/elby-designs-cgs762-slope-detector
> 
> Or just take the clock/gate from whatever is controlling the cv before the uScale. If it's already stepped that is. 
> 
> Sent from my iPad
> 
>> On Nov 18, 2014, at 3:07 AM, Neil Kagan blinkenlicht@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
>> 
>>  
>> The closest to the second but would be the A-156 as when it quantizes it outputs a trigger. 
>> 
>> I'm not sure about the first part; what is causing the changing rate of the cv? 
>> 
>> Sent from my iPhone
>> 
>>> On 18 Nov 2014, at 07:38, David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100] <Doepfer_a100@yahoogroups.com> wrote:
>>> 
>>>  
>>> Hi,
>>> 
>>> I'm wondering how to do two things. 
>>> 1) To create a CV based (proportional to) on the rate of change of another CV
>>> 2) To create a gate when there is a step in a CV. This is particularly but not exclusively the output of a Intellijel uScale - so when there is a new pitch I would like to create a gate. 
>>> 
>>> Hoping there is maybe a simple solution,
>>> 
>>> David
>>> 
>>> www.movingisliving.co.uk
>>> 
>>> Sent from my iPhone
>>> 
> 
>