Doepfer

I have taken the filter module and the envelope module out - checked the wiring and plugged them back in - no difference in performance. Even tried different power sockets on the rail in the system to make sure there wasn't a dodgy one. No luck :-)

David

www.movingisliving.co.uk

Sent from my iPhone 

> On 24 Aug 2014, at 13:52, "Nicholas Keller maq163x2@gmail.com [Doepfer_a100]" <Doepfer_a100@yahoogroups.com> wrote:
> 
> I didn't know you had purchased this BS2 second hand and from eBay.  Have you made sure the modules are all plugged in to the power bus?  Some circuits can pass audio without being powered.  And companies that sell electronics on eBay are not necessarily aware of how they work and what they should even do!
> 
> Good luck
> 
> Nick
> 
> 
> Sent from the future
> 
>> On Aug 24, 2014, at 8:30 AM, "David Kellett davidkellettwoulf@yahoo.com [Doepfer_a100]" <Doepfer_a100@yahoogroups.com> wrote:
>> 
>>  
>> Thanks for the help. 
>> 
>> I shall see if I can get the chip I need. 
>> 
>> David
>> 
>> www.movingisliving.co.uk
>> 
>> Sent from my iPhone 
>> 
>>> On 24 Aug 2014, at 13:25, "fleur.de.florence01@gmail.com [Doepfer_a100]" <Doepfer_a100@yahoogroups.com> wrote:
>>> 
>>>  
>>> yes that is all you need to do, for cons I have no idea of the strength he needed, but when the introduction of the new chip well check it is properly nested so that it did not loose connections
>>> 
> 
>