Yahoo Groups archive

Doepfer

Index last updated: 2026-04-29 00:15 UTC

Message

Dieter - 2 questions on the A-189-1 Bit Modifier

2014-04-23 by richyho@virginmedia.com

Hi


I just received an A-189-1 Bit Modifier module and the ribbon cable connecting JP2 to the mode dial has become disconnected in transit. Please can you confirm that...


a) At the JP2 (PCB) end the red connector is towards the bottom of the module and...

b) At the Mode dial end the red connector is towards the module's front panel.


Also I see there is an expansion port (JP4) on the PCB. What is this used for?


Thanks


Richard Horsman

Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.