Yahoo Groups archive

Doepfer

Index last updated: 2026-04-29 00:15 UTC

Message

RE: [Doepfer_a100] Alternatives to A-155 for trigger/gate sequencing

2014-02-27 by david.salter@thomsonreuters.com

This is proving to be a really interesting thread

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
David Salter
Senior Consultant
Solutions Services EMEA North


Thomson Reuters

O +44 (0)20 7542 2402X 52402
M 07990562402

david.salter@thomsonreuters.com
thomsonreuters.com

-----Original Message-----
From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] On Behalf Of yahoo@doepfer.de
Sent: 27 February 2014 15:15
To: Doepfer_a100@yahoogroups.com
Subject: AW: [Doepfer_a100] Alternatives to A-155 for trigger/gate sequencing

> Thanks for that suggestion David. I've never paid much attention to 
> the ASol modules and this one's a beauty! But... I am planning a small 
> 100% Doepfer synth and would like to come up with a sequencing 
> solution that is fully modular (combining the following A- modules: 
> 147 148 150 151 152 156 160 161 etc), . I thought about using the 
> A-182-1 switched multiple but I think that it would short out the 
> A-161's outputs. An 8HP A-186-1 with a switch at each input and 9 
> sockets instead of 8 would be a perfect partner for an A-161! 
> Dieter...?

It would be much easier to modify the A-182 by adding a diode between each socket and switch. Simply interrupt the pcb track between socket and switch, solder a diode between socket and switch (the schematics is shown on the
A-186 page) and add an output socket. That way you obtain a "switched" A-186 gate/trigger combiner.

It would probably take only a few hours to "condense" the A-182 pcb and front panel to obtain such a module (with 9 sockets and 8 switches). But I'm not sure if there are sufficient inquiries for such a module. An additional option would be select between "DC coupled combination" (i.e. gate remains a steady gate signal at the sum) or "AC coupled combination" (i.e. only the rising edges of the inputs signals are used to generate the combined trigger signal). The two types could be distinguished by left/right positions of the switches (center = off).

Best wishes
Dieter Doepfer



------------------------------------

Yahoo Groups Links

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.