Doepfer

I don't have an A-185, but I think you are correct.  The A-190 should provide CV/Gate to Case 1 (only the modules in the same 3U row as the A-190, unless you have the extra cable to connect your bus boards).  The sockets on the A-190 can send the signals to the other case's A-185, so the A-111s and A-141 can be fed from the Case 2 system bus (again, only the same row as A-185 unless you have the bus board connection cable).

That should drive your VCOs without any tuning issues ... I think....  

Nick



> On Nov 6, 2013, at 12:23 AM, <karelvanbezooijen@yahoo.com> wrote:
> 
> Please tell me if I'm right or wrong.
> 
> I have a few cases with modules:
> 
> Case 1: standard basic system 2 with 2 x VCO 110 and A-190
> Case 2: another case with 3 x VCO 111 plus A-141 VCADSR.
> 
> In order to control Case 2 with the same gate and CV from the A-190 I only need an A-185-1 in Case 2.
> When I connect The A-190 to  the A-185-1 it should be allright, right?
> 
> I read the A-185-1 manual but why should I also put an A-185-1 in Case 1?
> 
> 
> regards,
> Karel van Bezooijen
> 
>