Doepfer

if you devide by 3 you should normally be ok. or by 6, if you want slower speed.

for best analog sequencer sync, use the gate out of the A190, make 16th notes patterns and send the gates to its clock input. this is the solution i use.

 
Bakis 


________________________________
 From: "etabetawave@yahoo.com" <etabetawave@yahoo.com>
To: Doepfer_a100@yahoogroups.com 
Sent: Friday, September 27, 2013 10:48 AM
Subject: [Doepfer_a100] Problem with Midi Clock in A-190
 


  
Hello,
Iam trying to synchronize a-190 by using midi clock from a Cubase project. The 190 clock output is
dividedby software divider and
controls a a-155 sequencer. But
the clock sent to the seq does not follow the project, that is too fast. The manual
of 190 says that the clock can be divided in these ways:
divisor clocks per note note length
1             96
                         
1/96th
3             32
                         
1/32nd
6             16
                         
1/16th
12           8
                           
1/8th
24           4
                           
1/4
but none of these is properly
controlling 155 seq…
This also happensif I leave the clock rate
unchanged and use the same in-160 clock
divider.
 
Has anyone hadthis problem?
thanks