Doepfer

IIRC, the ARP 2600 needs high voltage to be triggered (close to 15 volts high)


 
Bakis


________________________________
 From: "yahoo@doepfer.de" <yahoo@doepfer.de>
To: Doepfer_a100@yahoogroups.com 
Sent: Tuesday, September 24, 2013 1:59 PM
Subject: AW: [Doepfer_a100] Dark Time low gate out signal
 


  
> I connected it to a ARP 2600 gate in.
>
>
> Phil

As far as I remember the ARP envelope generators require both gate and
trigger. But I have heard that in most cases it's sufficient to connect the
gate source to both ARP sockets (gate and trigger) via a multiple. Maybe
someone in the group has experience with the ARP2600.

Best wishes
Dieter Doepfer