Well again, the gate output of the Minibrute alone does the job perfectly.
I will try the DT with some eurorack envelopes later on and get back to you...
Regards,
Phil
Regards,
Phil
On Tue, Sep 24, 2013 at 12:59 PM, <yahoo@doepfer.de> wrote:
> I connected it to a ARP 2600 gate in.
>
>
> Phil
As far as I remember the ARP envelope generators require both gate and
trigger. But I have heard that in most cases it's sufficient to connect the
gate source to both ARP sockets (gate and trigger) via a multiple. Maybe
someone in the group has experience with the ARP2600.
Best wishes
Dieter Doepfer