I connected it to a ARP 2600 gate in.
Phil
On Tue, Sep 24, 2013 at 12:38 PM, <yahoo@doepfer.de> wrote:
> I tried both positions and the result is the same and I doubt the
> Minibrute's gate output delivers more than 5V....
>
> Regards,
> Phil
The Dark Time gate output circuit is a 10k pullup resistor (connected to +5V
or +12V depending on the jumper position) and a transistor switching to GND.
If the input load of the envelope generator connected to the gate output is
too low this may explain the behaviour. The envelope generators of the A-100
and other Doepfer units have 47k load (or more) and 2V are sufficient to
trigger the envelope. Maybe the envelope generator you use has a much lower
load. Which envelope generator do you connect to the Dark Time ? E.g. some
MFB units are known for their unusual load.
Best wishes
Dieter Doepfer
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Doepfer_a100/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/Doepfer_a100/join
(Yahoo! ID required)
<*> To change settings via email:
Doepfer_a100-digest@yahoogroups.com
Doepfer_a100-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
Doepfer_a100-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://info.yahoo.com/legal/us/yahoo/utos/terms/