I tried both positions and the result is the same and I doubt the Minibrute's gate output delivers more than 5V....
Regards,
Phil
Regards,
Phil
On Tue, Sep 24, 2013 at 12:11 PM, <yahoo@doepfer.de> wrote:
> Thanks for your reply.
> Maybe my measuring method is not correct, I will try to find some
> of these tools you recommend but what fact is I cannot get the
> envelope of my synth triggered properly when feeding it with the
> gate output of the DT, the envelope is lazy and weak, whereas
> when I send the gate output of a Minibrute for example into the
> same synth it triggers the envelopes perfectly, strong and clear,
> this is why I assumed that signal from the DT was too low.
>
>
> Regarding the other question I will contact Christian next week then.
>
>
> Thanks,
> Phil
Maybe the +5V gate level is not sufficient and you have to select the +12V
gate level by changing the corresponding jumper.
Best wishes
Dieter Doepfer