Thanks for the reply!
Yes, I'm trying to use the MC-4 to sequence notes on the DX7, and record them from the DX7 output (the same way you'd connect an analog monosynth with the MC-4, but without the converter in between).
But the MCV-4 and the A-192-2 convert in different directions, only one-way each. For instance, the MCV-4 is MIDI to CV, and the A-192-2 is CV-MIDI.
I'd guess the A-192-2 would work in this case, right?
Thanks!
--- In Doepfer_a100@yahoogroups.com, <doepfer_a100@yahoogroups.com> wrote:
Hi!
Hope that helps,
Zoë.
> Has anyone tried a combination like this? I have a Roland MC-4 sequencer with only CV and Gate (No MIDI), and I'd like to use a DX7 (with MIDI, no CV) as the source/controller.What are you trying to do? If you're trying to play notes on the DX-7 and record them on the MC-4, then yes, that should work using the MCV-4 or A-192-2 to convert them. I haven't tried this, but the Yamaha and Doepfer devices both use the MIDI standard very well, and the Doepfer and Roland ones use the 1V/Oct standard very well, so it should work fine.
>
> Has anyone done something similar with the A-192-2, or the MCV4?
Hope that helps,
Zoë.