Thank YOU, Peter! Sent from the future On Jul 13, 2013, at 10:24 PM, Peter Sedin <peterhksedin@gmail.com> wrote: > brilliant.. > > > 2013/7/14 Peter Sedin <peterhksedin@gmail.com> > >> >> thanks for this! >> >> ---------- Forwarded message ---------- >> From: niroke <maq163x2@gmail.com> >> Date: 2013/7/13 >> Subject: [Doepfer_a100] track made to demonstrate timing multiplication in >> MAQ >> To: Doepfer_a100@yahoogroups.com >> >> >> ** >> >> >> http://vimeo.com/70227036 >> >> This video matches the soundcloud link I posted the other day in the >> DoepferMAQ group. It shows Row 2 altering the timing of both Rows 1 + 2. >> Row 1 is sequencing an A-100 patch, which was recorded in one take, with >> realtime manual control of FM Depth, Cutoff, and Note Length (using a >> joystick and VC Decay module). If you follow the lights on the top row, you >> will see the sequence speeding up according to the settings of row 2. The >> first minute is just the modular patch sequenced by the MAQ. Row 1 is set >> to pendulum mode. This sequence continues to play for the entire track. >> You will also notice that sometimes there is no sound when Row 1 is >> moving. These missing notes were muted from the captured audio when >> arranging the track, and mainly occur at the very beginning and very end >> of the track. Otherwise, no editing of the MAQ sequence was done. Had I >> planned ahead, these mutes could have been performed live using a joystick >> and logic module but would have given different results. >> The soundcloud file I posted was rendered at 124bpm. I had to re-render >> another version at 120bpm to sync to the video. I made a few changes while >> I was at it, but nothing major. Other sounds were played and recorded as >> audio from an Indigo 2. >> >> nick >> >> >> >> >> >> -- >> >> >> Mvh >> >> Peter H.K Sedin > > > > -- > > > Mvh > > Peter H.K Sedin > > > [Non-text portions of this message have been removed] > > > > ------------------------------------ > > Yahoo! Groups Links > > >
Message
Re: [Doepfer_a100] track made to demonstrate timing multiplication in MAQ
2013-07-14 by Nicholas Keller