Doepfer

--- In Doepfer_a100@yahoogroups.com, <yahoo@...> wrote:
>
> > Hello
> >
> > the adjustment of the volt/octave setting will always cause a change of
> > the offset. You always have to readjust the offset after adjusting the
> > V/Oct. I won't know whether (and if yes where) the Darktime has an
> > offset trimmer, but I am quite sure there is one. I think Dieter will
> > jump in tomorrow.
> >
> > Florian
> 
> As far as I know the offset can be adjusted only by the software (there are
> no trimming potentiometer for CV offset available on the pcb, only for CV
> scale). As I'm not the Dark Time specialist please ask Christian Assall
> (software@...) how to adjust the offset if you cannot find it in the
> user manual. But unfortunately he is on holiday since today. In the meantime
> the offset can be compensated with the tune control of the VCO(s).
> 
> Best wishes
> Dieter Doepfer
>

Dieter, thanks for the reply.
I have emailed Christian and an auto response says he is away until 23 July (nice long holiday!)

Does anybody else out there know how to access the CV offset on a Dark Time?

Thanks