Doepfer

Hello

the adjustment of the volt/octave setting will always cause a change of 
the offset. You always have to readjust the offset after adjusting the 
V/Oct. I won't know whether (and if yes where) the Darktime has an 
offset trimmer, but I am quite sure there is one. I think Dieter will 
jump in tomorrow.

Florian


On 02.06.13 16:16 , sm.ms@virgin.net wrote:
> Hi
>
> I have just adjusted the scaling for my Dark Time Sequencer and now find that when I use the Dark Time via CV outputs with the A-110 VCO's I have to retune them, to about position 8 on the Tuning knob, in order for them to be in tune with other keyboards.
>
> When I use the Dark Time with the A-110 VCO's via midi I have to retune the A-110's again to about position 5 on the tuning knob.
>
> Is this normal behaviour?
>
> I thought that the setting of the tuning knob should be the same for CV or midi.
>
> Is there another adjustment that can be made on the Dark Time so that the VCO's do not have to be retuned?
>
> Any advice would be appreciated
>
>
> Thanks
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>