Doepfer

Ignore me when i read AS i thought analogue systems, should have read the post title. nothing i suggested was correct for your modules. 




On 1 Jun 2013, at 12:10, Kim Johnsson <johnssonkim@gmail.com> wrote:

> Hi guys,
> 
> Julian said:
> 
>> http://www.analoguesolutions.org.uk/concussor/manuals/concussor.pdf
>> It suggests (i think) using the 16 pin cable, and just offsetting it, but
> i found that
>> was not possible on some A.Sol modules, due to component density.
> 
> Yeah, I checked that one out as well. My interpretation of it is that it
> should work for me.
> 
> Analogmonster said:
> 
>> synovatron has some on ebay right now
> 
> That appears to me to be for using an AS case with Doepfer modules, but it
> might work the other way around as well?!?
> 
>> Probably an even better option for you considering the fear of diy-
> schneidersladen
>> sell exactly the cables you need, no adapters or diy required
>> http://www.schneidersladen.de/en/analogue-systems-doepfer-adapterkabel-2
> 
> I wondered about this: It's for Analogue Systems, not Solutions, but they
> could of course be compatible...?
> 
> I think I'll throw an email at Schneider's...
> 
> Cheers, and thanks for your help,
> 
> Kim
> 
> 
> 
> On Fri, May 31, 2013 at 1:03 AM, <analogmonster@ymail.com> wrote:
> 
>> **
>> 
>> 
>> 
>> 
>> On 30 May 2013, at 22:56, analogmonster@ymail.com wrote:
>> 
>>> 
>>> On 30 May 2013, at 18:36, Kim Johnsson <johnssonkim@gmail.com> wrote:
>>> 
>>>> Hi guys,
>>>> 
>>>> I wonder if you can help me. Some time ago I bought the AS BDxx modules
>>>> second hand, but they came without the power cable. Do you know
>> whether the
>>>> standard Doepfer flat cables (as well as apparently the additional +5V
>>>> adapter for the BD99) work for installation into my Doepfer G6, and if
>> not,
>>>> what cables should I get?
>>>> 
>>>> Regards,
>>>> 
>>>> Kim Johnsson
>>>> 
>>>> [Non-text portions of this message have been removed]
>>>> 
>>>> 
>>>> Reply via web post Reply to sender Reply to group Start a New Topic
>> Messages in this topic (1)
>>>> RECENT ACTIVITY: New Members 1
>>>> Visit Your Group
>>>> Switch to: Text-Only, Daily Digest � Unsubscribe � Terms of Use � Send
>> us Feedbac
>>> 
>>> I recently bought an as rs-95 vco. They are not directly compatible. Rs
>> has no cv and gate bus, and the order of the power lines on the as is
>> different. Just changing the connector type on the end of the ribbon cable
>> will almost certainly damage your module.
>>> 
>>> You need to build or buy an adapter. I made my own but ive seen them
>> about, synovatron has some on ebay right now (searched for doepfer adapter)
>> but im pretty sure there are others available
>>> 
>>> [Non-text portions of this message have been removed]
>>> 
>>> 
>>> Reply via web post Reply to sender Reply to group Start a New Topic
>> Messages in this topic (5)
>>> RECENT ACTIVITY: New Members 1
>>> Visit Your Group
>>> Switch to: Text-Only, Daily Digest � Unsubscribe � Terms of Use � Send
>> us Feedback
>> 
>> Probably an even better option for you considering the fear of diy-
>> schneidersladen sell exactly the cables you need, no adapters or diy
>> required
>> 
>> http://www.schneidersladen.de/en/analogue-systems-doepfer-adapterkabel-2
>> 
>> 
>> [Non-text portions of this message have been removed]
>> 
>> 
>> 
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> ------------------------------------
> 
> Yahoo! Groups Links
> 
> 
>