Doepfer

On 30 May 2013, at 18:36, Kim Johnsson <johnssonkim@gmail.com> wrote:

> Hi guys,
> 
> I wonder if you can help me. Some time ago I bought the AS BDxx modules
> second hand, but they came without the power cable. Do you know whether the
> standard Doepfer flat cables (as well as apparently the additional +5V
> adapter for the BD99) work for installation into my Doepfer G6, and if not,
> what cables should I get?
> 
> Regards,
> 
> Kim Johnsson
> 
> [Non-text portions of this message have been removed]
> 
> 
> Reply via web post	 Reply to sender	 Reply to group	Start a New Topic	Messages in this topic (1)
> RECENT ACTIVITY: New Members 1
> Visit Your Group
> Switch to: Text-Only, Daily Digest • Unsubscribe • Terms of Use • Send us Feedbac


I recently bought an as rs-95 vco. They are not directly compatible. Rs has no cv and gate bus, and the order of the power lines on the as is different.  Just changing the connector type on the end of the ribbon cable will almost certainly damage your module.

 You need to build or buy an adapter. I made my own but ive seen them about, synovatron has some on ebay right now (searched for doepfer adapter) but im pretty sure there are others available

[Non-text portions of this message have been removed]