Yahoo Groups archive

Doepfer

Index last updated: 2026-04-29 00:15 UTC

Message

Re: Analogue Solutions BD88 and BD99 into Doepfer G6

2013-05-30 by julianfincham

From memory (which may be wrong!) you will want the narrower, 10 pin cables, and you will need to twist them.

The pcbs should have the pin voltages / polarity marked, so just be sure that you line this up correctly with the doepfer bus board - the tech spec of which is on the website somwhere.

Julian

Attachments

  • No local attachments were found for this message.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.