Doepfer

Hello

one thing comes to my mind: What is the note length of the notes?

I could imagine that the interface can get difficulties with minimal 
note lengthes.

Florian

Am 08.08.2012 14:35, schrieb skp_pete:
>
>
> --- In Doepfer_a100@yahoogroups.com,<yahoo@...>  wrote:
>>
>>> hello,   i've got a weird issue concerning the a-190 when used
>>> with the velocity out from CV2.   i've had the module for over 2
>>> years and its been fine up until now
>>>
>>> i'm using the velocity to control the volume on my vca's .
>>>
>>> i'm essentially getting spikes in volume on some notes, or some
>>> notes dont play
>>>
>>> the midi notes with velocity are programmed in ableton
>>>
>>> i've tried both my a-132-4 and my a-131 vca's and i get the same
>>> response.  normally the patches consist of differing notes
>>> lengths and velocity of course but here's a very simple patch to explain :
>>>
>>> velocity into CV of vca
>>> osc into vca in
>>> vca out to speakers
>>> all midi notes set to velocity 100
>>>
>>> basically sounds like the voltage coming from CV2 is not steady
>>>
>>> its got me me miffed
>>> thanks
>>
>> Provided that all transmitted velocity values are indeed 100 the CV2 should
>> stay at a fixed voltage. If this does not apply something seems to be wrong.
>> Please contact our A-190-1 specialist Matthias Marass
>> (keyboards(at)doepfer(dot)de) to find out what's wrong.
>>
>> Best wishes
>> Dieter Doepfer
>
>
>
> thanks for that, i just sent him an email
>
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>


-- 
http://fa.utfs.org/