Doepfer

--- In Doepfer_a100@yahoogroups.com, <yahoo@...> wrote:
>
> > hello,   i've got a weird issue concerning the a-190 when used
> > with the velocity out from CV2.   i've had the module for over 2
> > years and its been fine up until now
> >
> > i'm using the velocity to control the volume on my vca's .
> >
> > i'm essentially getting spikes in volume on some notes, or some
> > notes dont play
> >
> > the midi notes with velocity are programmed in ableton
> >
> > i've tried both my a-132-4 and my a-131 vca's and i get the same
> > response.  normally the patches consist of differing notes
> > lengths and velocity of course but here's a very simple patch to explain :
> >
> > velocity into CV of vca
> > osc into vca in
> > vca out to speakers
> > all midi notes set to velocity 100
> >
> > basically sounds like the voltage coming from CV2 is not steady
> >
> > its got me me miffed
> > thanks
> 
> Provided that all transmitted velocity values are indeed 100 the CV2 should
> stay at a fixed voltage. If this does not apply something seems to be wrong.
> Please contact our A-190-1 specialist Matthias Marass
> (keyboards(at)doepfer(dot)de) to find out what's wrong.
> 
> Best wishes
> Dieter Doepfer



thanks for that, i just sent him an email