Doepfer

> hello,   i've got a weird issue concerning the a-190 when used
> with the velocity out from CV2.   i've had the module for over 2
> years and its been fine up until now
>
> i'm using the velocity to control the volume on my vca's .
>
> i'm essentially getting spikes in volume on some notes, or some
> notes dont play
>
> the midi notes with velocity are programmed in ableton
>
> i've tried both my a-132-4 and my a-131 vca's and i get the same
> response.  normally the patches consist of differing notes
> lengths and velocity of course but here's a very simple patch to explain :
>
> velocity into CV of vca
> osc into vca in
> vca out to speakers
> all midi notes set to velocity 100
>
> basically sounds like the voltage coming from CV2 is not steady
>
> its got me me miffed
> thanks

Provided that all transmitted velocity values are indeed 100 the CV2 should
stay at a fixed voltage. If this does not apply something seems to be wrong.
Please contact our A-190-1 specialist Matthias Marass
(keyboards(at)doepfer(dot)de) to find out what's wrong.

Best wishes
Dieter Doepfer