Doepfer

Hi

> do is desolder all the mini
> jacks and pots (you will almost certainly destroy the mini-jacks -
> no bad thing:).
It is very easy to desolder minijacks if you have a soldering iron, that
provides replacable tips. There are special tips for 6pin or 8pin DIL-ICs.
If you find a 6pin tip it is perfect to heat all four pins of the mini jack
at the same time. I have a 8pin tip, which is a littlebit too long, but if
you place the tip careful centered on the minijacks soldering it should not
trouble 

the example for my ERSA soldering iron is:
URL:http://www.buerklin.com/gruppen/KapL/L173220.asp

Florian
-- 
Florian Anwander                  |ConSol*  HP-Support
Tel.   +49.89.45841-133           |Consulting&Solutions Software GmbH
Fax    +49.89.45841-139           |Franziskanerstr. 38, D-81669 München
email: florian.anwander@consol.de |http://www.consol.de