Doepfer

> -----Ursprungliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Daniel Troberg
> Gesendet: Samstag, 12. November 2011 15:59
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] MCV24 velocity to CV issue
>
>
> calling all MCV24 users,
>
> I have an issue with my MCV24, latest OS. using the SIX4ONE
> preset (or programming manually), sending a note velocity at 118
> and higher makes the CV output for the velocity go to 0V ! this
> happens on all the channels outputting velocity.
>
> anyone noted this behaviour?
>
> it was suggested to me that I should route the velocity to either
> the sustain parameter of the adsr or the adsr depth to scale the
> depth of the velocity modulation but I have yet to achieve this.
> if anyone could give me some pointers I would be happy to try that out.
>
> thanks
>
> daniel

Though the MCV24 is out of production since more than 5 years Christian
Assall (software@doepfer.de) may help you. He is the programmer of the MCV24
firmware.

Best wishes
Dieter Doepfer