Doepfer

that sounds like the best possible plan for the future someday. 4 octaves would be too much, but around one seems right. gonna have to practice my soldering chops before i attempt it though ;-) . thanks for the tip!



________________________________
From: Florian Anwander <fanwander@mnet-online.de>
To: Doepfer_a100@yahoogroups.com
Cc: yahoo@doepfer.de
Sent: Friday, October 14, 2011 2:01 AM
Subject: Re: [Doepfer_a100] Dark Energy/Time/A110 tuning discrepancy

Hello

> The range of the tuning knob can be modified by lowering the resistor R5
> (1M). If you replace the 1M e.g. by 100k you obtain about a four octaves
> range (but then it's more difficult to tune the VCOs).
I recommend to solder another 1M resistor in parallel to the existing 
R5. This increases the range to a little bit more than one octave, but 
the range is still small enough, to do a satisfying fine tuning.
This is the most easy thing, as you do not have to desolder the existing 
resistor.


------------------------------------

Yahoo! Groups Links



[Non-text portions of this message have been removed]