Doepfer

> Hi Dieter
>
> Am 20.07.2011 09:57, schrieb yahoo@doepfer.de:
> How about the A-142 ? It can be used as a voltage controlled
> trigger delay.
> How? Ok, it provides a voltage controlled gate length. But trigger
> delay? The inverted out would provide always a gate with length until
> the next straight note on... and that would be not wanted too.
>
> Florian

Hi Florian,

one would need two A-142. Then you obtain the same functions a the A-162 but
with voltage control.

We are also working on a "real" voltage controlled gate delay module, i.e.
the complete gate signal (rising and falling edge) is delayed. A bit like an
audio delay but for gate signals. And as an option we think about an
independend delay time for the rising and falling edge of the gate signal.
The module is in a very early development state as we have to finish some
other modules (A-143-4 Quad VCLFO/VCO with Sync/Reset, A-192-2
CV/Gate-to-Midi/USB interface, A-190-5 polyphonic Midi/USB-to-CV/Gate
interface, 8x16 trigger sequencer, touch sensor module and some more).

Best wishes
Dieter