Doepfer

Okay, basic set up looks good. Try the following settings: On the A-140 put the 
switch in the 'M' position, Attack 0, Decay 5, Sustain 3, Release 3. On the 
A-131 Gain 3, In 10, Out 10. 


Also make sure that the 'Range' knob of the A-110 sits somewhere in the middle 
region. Perhaps also use another A-110. You can also insert your output cable 
directly into one of the waveform outputs of the A-110 to test whether you get 
any audio at all. 


As for your conncetion to the soundcard I can't really help you there. I assume 
you have tested it with other audio devices so you are sure it works. Try 
inserting a headphone into the VCA to check whether you can get some sound but 
watch those levels, the A-100 output is very hot. 


And don't despair, having a modular and wondering why there's no sound go hand 
in hand. 





________________________________
From: computergirl_21 <sophiebernhard@hotmail.com>
To: Doepfer_a100@yahoogroups.com
Sent: Sunday, January 2, 2011 11:17:26
Subject: [Doepfer_a100] Re: Total, complete, utter newbie question

  
Thank you for the fast reply, York!

this is how I patched it:
CV -> A-110 CV1 -> A131 Audio In
Gate -> A-140 Gate ->A131 CV1

I can see the envelope generator module LED lighting up when I press on a MIDI 
key, but still no sound.

For the output, I tried to use a patch lead and a 1/4" adaptor to plug it in the 
soundcard. Nothing. So I then use an audio cable and used another adaptor to be 
able to plug it in the output of the VCA. Nothing.

What am I missing?!?!…

thank you anyway!

Best
Sophie

--- In Doepfer_a100@yahoogroups.com, york luethje <ybl@...> wrote:
>
> Hi Sophie,
> 
> Happy New Year to you as well. Can you tell us how you set up the Kenton? A 
> basic patch would look something like this:
> 
> CV -> A-110 -> A-131 (Audio In)
> 
> Gate -> A-140 -> A-131 (CV In) -> Out
> 
> This should at least give you some sound and you can take it from there. Be 
> aware that the envelopes in their 'fast' setting are really fast so you may not 
>
> hear anything due to the envelope already being closed again.
> 
> York
> 
> 
> 
> 
> 
> 
> ________________________________
> From: computergirl_21 <sophiebernhard@...>
> To: doepfer_a100@yahoogroups.com
> Sent: Sunday, January 2, 2011 10:47:34
> Subject: [Doepfer_a100] Total, complete, utter newbie question
> 
> 
> Hello all,
> 
> I just bought a used A-100 with the following modules :
> 3 x A110 VCO
> 1 x A112 Sampler/Wavetable Oscillator (superb)
> 1 x A114 Dual Ring Modulator
> 1 x A118 Noise / Ramdom generator
> 1 x A121 VCF2 Multimode Filter
> 1 x A120 VCF
> 1 x A131 VCA
> 1 x A134 VC Auto panner
> 1 x A138 Linear Mixer
> 3 x A140 Envelope Generator (ADSR)
> 1 x A147 VC LFO
> 1 x A145 LFO
> 1 x A148 Dual Sample and Hold
> 1 x A162 Dual Trigger / Delay
> 
> Eventually, I'd like to use it with Silent Way and Numerology, but right now, I 
>
> would just like to get started. I have a Kenton Pro Solo MkII and thought I 
> could use it with a MIDI keyboard. So far, I cannot hear any sound… :-s
> that is why I thought I would ask you all how I should proceed. I feel silly, 
> but I am doing all by myself and sometimes, I just get stuck. Thanks for 
>reading 
>
> and a happy 2011 to you!
> 
> Cheers
> Sophie
> 
> 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
>


 



[Non-text portions of this message have been removed]