Doepfer

yes, a vca before the a136 helps a lot indeed. 
a dynamic signal fed into the a136 in general
gives best results.


Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist

[Doepfer_a100] group owner

www. parallel - worlds - music. com

www. myspace. com/ parallelworldsmusic

www. myspace. com/ interconnectedmusic

www. myspace. com/ memorygeist

www. DiN. org. uk

www. musicamaximamagnetica. com

www. vu-us. com

--- On Thu, 11/11/10, selfoscillate <synaptic_music@yahoo.com> wrote:

From: selfoscillate <synaptic_music@yahoo.com>
Subject: Re: FW: [Doepfer_a100] a New month of modular patching ideas...
To: Doepfer_a100@yahoogroups.com
Date: Thursday, November 11, 2010, 2:25 PM







 



  


    
      
      
      



> regarding the a136, a116, use them before the filter module, after the osc's (pretty obvious i know). 



i recommend to use a filter or a vca/mixer/attenuator

in front of the a136 (especially when the filter lowers

the amplitude of the signal). the a136 is very sensitive and

has no attenuator at the signal input. if your input signal

is too hot (like an unattenuated mix of vco waves) you

will probably just get square waves out of the a136. 

not that this would sound bad, but it will not show the

real capabilities of the a136. modulating the signal amplitude

before the a136 can be more interesting than modulating the

settings of the a136 itself. two filters are even better,

one before and one after the a136.

by the way, the cv inputs of the a136 also don't have 

attenuators (the corresponding knobs are disabled when

a plug in inserted into the cv inputs), so an external

attenuator is the best friend of the a136.



best wishes



ingo





    
     

    
    


 



  






      

[Non-text portions of this message have been removed]